VCDQuality Forums - wiikey disc brand compatability

Pages (2): « 1 [2]
Show all 29 posts from this thread on one page

VCDQuality Forums (http://www.vcdhq.com/forum/index.php)
- TV, Games, Music, Sport, Art, Design and other stuff (http://www.vcdhq.com/forum/forumdisplay.php?forumid=30)
-- wiikey disc brand compatability (http://www.vcdhq.com/forum/showthread.php?threadid=77505)

Posted by Arthur Daily on 07-25-2007 05:47 AM:

i use Wiinja, plays every feckin dvdr i slap in the wii

__________________
*Meet the rest of the VCDQ Crew, HERE *

Posted by kake2k on 07-25-2007 06:23 AM:

if you do get it working eventually sony dvd-r will definitely work, i've used sony, verbatim and fuji all without any problems so far

Posted by Iammyself on 07-25-2007 06:57 AM:

quote:
Originally posted by Arthur Daily
i use Wiinja, plays every feckin dvdr i slap in the wii

did you say this without reading the thread? I will always appreciate your info... but the whole thread was past modchip from step #!

you are fantastic with most posts tho..

I HAVE FOUND SEVERAL people to fix my problem though!!

Posted by Mr_Grinch on 07-26-2007 12:36 AM:

If you're gonna go ahead and dremel it like Neversoft suggested, then don't bother bridging the points, it already looks like you've desoldered the chip.

I'd just solder from the exposed points on the drive chip to the modchip itself.

Although I had to do an install to the drive leg and that was tricky enough, a steady hand and a GOOD soldering iron will be needed to do this.

Neversoft, suck my cock and fuck my cunt.

__________________
<Mr_Grinch> yes. I have aids. Which I got from bumming men.

Posted by Neversoft on 07-26-2007 12:27 PM:

quote:
Originally posted by Mr_Grinch
Neversoft, suck my cock and fuck my cunt.

I'd like to shove your dick up your grumble and pick you up like a handbag you saucy fucker! xx

__________________
Statistically... 9 out of 10 people actually enjoy gang rape.

Posted by Avenue_1 v3.0b on 07-26-2007 06:53 PM:

Yup, listen to NS, do it yourself. Soldering isn't rocket science. Get yourself a good free-standing magnifying glass (have a magnify lamp myself), and ever so slightly tin the wire to be soldered straight onto drive chip. Put some flux onto cut leg of drive chip (dont try to tin it!). then just touch very quickly the wire with your iron while holding it against cut leg. Joint will quickly and easily be made.

or in Gordon Ramsay style

LOOK THROUGH FUCKING MAGNIFIER,
TIN FUCKING WIRE,
FLUX FUCKING DRIVE CHIP,
TOUCH WIRE WITH FUCKING IRON,
SOLDERING FUCKING DONE!

__________________

Posted by Neversoft on 07-26-2007 08:38 PM:

CUNT!

(sorry, I was feeling left out)

__________________
Statistically... 9 out of 10 people actually enjoy gang rape.

Posted by Mr_Grinch on 07-27-2007 01:42 AM:

quote:
Originally posted by Avenue_1 v3.0b
Yup, listen to NS, do it yourself. Soldering isn't rocket science. Get yourself a good free-standing magnifying glass (have a magnify lamp myself), and ever so slightly tin the wire to be soldered straight onto drive chip. Put some flux onto cut leg of drive chip (dont try to tin it!). then just touch very quickly the wire with your iron while holding it against cut leg. Joint will quickly and easily be made.

or in Gordon Ramsay style

LOOK THROUGH FUCKING MAGNIFIER,
TIN FUCKING WIRE,
FLUX FUCKING DRIVE CHIP,
TOUCH WIRE WITH FUCKING IRON,
SOLDERING FUCKING DONE!

He's NOT doing it to the drive chip leg. There isn't a fucking leg there. What he needs to do is actually REMOVE a bit of the top of the drive chip (the black bit) by either burning it or via dremel and THEN solder to the contacts revealed underneath. It's incredibly risky.

__________________
<Mr_Grinch> yes. I have aids. Which I got from bumming men.

Posted by Iammyself on 07-28-2007 04:37 AM:

quote:
Originally posted by Mr_Grinch
If you're gonna go ahead and dremel it like Neversoft suggested, then don't bother bridging the points, it already looks like you've desoldered the chip.

I'd just solder from the exposed points on the drive chip to the modchip itself.

Although I had to do an install to the drive leg and that was tricky enough, a steady hand and a GOOD soldering iron will be needed to do this.

Neversoft, suck my cock and fuck my cunt.

i didnt desolder the chip, just posted the picture that showed me why the chip wasnt working

i havent a steady hand by far, this is why im not trying, naturally shaky and the alcoholism doesnt help...

All times are GMT. The time now is 06:12 PM.

Pages (2): « 1 [2]
Show all 29 posts from this thread on one page