VCDQuality Forums

Pages (2): « 1 [2]
Show all 28 posts from this thread on one page

VCDQuality Forums (http://www.vcdhq.com/forum/index.php)
- General Discussion (http://www.vcdhq.com/forum/forumdisplay.php?forumid=4)
-- Question (http://www.vcdhq.com/forum/showthread.php?threadid=84837)

Posted by Ripper on 03-11-2009 11:13 PM:

Gezzer tried the freezing for 24 hrs but it didn't work, will go down the list to get the fuckers out i don't have a vice here will try wd40 and find a bolt big enough as the 2 sockets are 14mm and 15mm so not the average size bolts
And yes they are metric sockets £400 odd worth (77 piece)

__________________
I was never caught!

Posted by gezzer on 03-12-2009 12:59 AM:

Ripper this will work... find a bolt that will fit, wind it thru if it comes up against the socket keep winding till it winds the nut out. if it winds thru the hole just wind it right thru then tap the bolt to get the nut out, sorted.

__________________
When your in a hole put down the shovel.

Posted by gezzer on 03-12-2009 01:05 AM:

As advice threads go this has got to be the most derailed, shittest thread I've seen yet, some of you (especially munson) need to get out more ,heat up socket=happy shopper socket .nice one whoever suggested that one.hit with hammer yeah ripper never thought of that either???

__________________
When your in a hole put down the shovel.

Posted by Neversoft on 03-12-2009 01:16 AM:

quote:
Originally posted by gezzer
As advice threads go this has got to be the most derailed, shittest thread I've seen yet, some of you (especially munson) need to get out more ,heat up socket=happy shopper socket .nice one whoever suggested that one.hit with hammer yeah ripper never thought of that either???

My advice is to take the socket to his mate and beat him about the face and body with it until he coughs-up some money to replace the bastard.

__________________
Statistically... 9 out of 10 people actually enjoy gang rape.

Posted by Munson on 03-12-2009 04:03 AM:

quote:
Originally posted by gezzer
As advice threads go this has got to be the most derailed, shittest thread I've seen yet, some of you (especially munson) need to get out more ,heat up socket=happy shopper socket .nice one whoever suggested that one.hit with hammer yeah ripper never thought of that either???

i would of had it out in 30 seconds with a hammer, a bolt, a tap and a vise. no forum mongoloid advice needed.

You retarded english faggot.

borrow an icepick and sterilize yourselves.

Posted by gezzer on 03-12-2009 08:53 AM:

quote:
Originally posted by Munson
i would of had it out in 30 seconds

I'm not doubting that, but this is about but this is about getting nuts out of a socket.

__________________
When your in a hole put down the shovel.

Posted by Neversoft on 03-12-2009 03:43 PM:

... Munson was talking about getting nuts out too.

__________________
Statistically... 9 out of 10 people actually enjoy gang rape.

Posted by Ripper on 03-13-2009 03:55 AM:

quote:
Originally posted by gezzer
Ripper this will work... find a bolt that will fit, wind it thru if it comes up against the socket keep winding till it winds the nut out. if it winds thru the hole just wind it right thru then tap the bolt to get the nut out, sorted.

Gezzer
I got the 15mm socket sorted and the nut out but the 14mm is gonna be harder to do as looking at the bolts they seem to be the same size and i can't fine my hammer so used 2 ratchets and sockets and tightened and loosened a bolt couple of times into the nut and kinda wedged the nut on 1 side and then tapped it out so half way there

__________________
I was never caught!

All times are GMT. The time now is 07:55 AM.

Pages (2): « 1 [2]
Show all 28 posts from this thread on one page