VCDQuality Forums - The Manchurian Candidate *SVCD* - TELESYNC

Pages (6): « 1 2 3 4 5 [6]
Show all 115 posts from this thread on one page

VCDQuality Forums (http://www.vcdhq.com/forum/index.php)
- VCD (http://www.vcdhq.com/forum/forumdisplay.php?forumid=19)
-- The Manchurian Candidate *SVCD* - TELESYNC - VideoCD (http://www.vcdhq.com/forum/showthread.php?threadid=45265)

Posted by XoXo on 08-08-2004 10:11 AM:

7/7/?

Posted by Tork on 08-08-2004 11:24 AM:

Thanks for all the tips guys, thought i downloaded something for nothing but in the end it all worked out thanks to this site.

oh yeah

7/8/Still watching

Posted by Bravo on 08-08-2004 07:46 PM:

The simplest way to convert is to let ulead moviefactory convert them for you(best to set it up before you go to bed as it will take time). Then if you want you can use tmpgenc or any encoder you want and convert it to your own taste. The picture quality was good, the sound has the "filter" hiss of noise removal. 8/6.5/8

Posted by robaczek80 on 08-10-2004 12:16 AM:

Re: videocd nfo and maven silver source

quote:
Originally posted by Yosho
I thought the movie sucked, qual is ok overall 6/7/1

I agree with that last rating note - this movie suxxx.

Posted by BLUE-NEO on 08-10-2004 12:19 AM:

ok this is the final post for all who want this to convert to dvd. First use Mainconcept Mpeg Encoder and Re-Encode the Mpegs to new svcd mpegs. Then demultiplex with TMPGenc. place the m2v and mp2 files into TMPGEnc Xpress and convert to NTSC DVD all 3 disc seperately..that way you can fix the audio to make sure in sync, next use the regular TMPGEnc and combine the three DVDmpegs to one file.

Note: Be Sure To convert each of the mpeg2 to only use 30% of the disc or less...to make sure that once they are combined they will fit on the dvdr.

Next make menus with DVD Movie Factory V.3 and burn.

Once thats done..rating goes up..9/10/7

__________________
Reality Is Only A State Of Mind...

Posted by intoxicated662 on 08-10-2004 08:15 AM:

I used MainConcept MPEG Encoder and when I played the movie, it was still messed up. The words were behind the picture a little bit. Anyone tried any of the mentioned ideas and have had them fully work? I have yet to find a fix for the movie..

Thanks!

Posted by BLUE-NEO on 08-10-2004 06:18 PM:

quote:
Originally posted by intoxicated662
I used MainConcept MPEG Encoder and when I played the movie, it was still messed up. The words were behind the picture a little bit. Anyone tried any of the mentioned ideas and have had them fully work? I have yet to find a fix for the movie..

Thanks!

yeah I know read my instructions carefully it said you can adjust the audio with TMPGEnc XPRESS...easy fix, during the svcd to dvd mpeg2 conversion.

__________________
Reality Is Only A State Of Mind...

Posted by pjfan281 on 08-10-2004 07:25 PM:

toooo much work fixing for dvd. baaaaad release

Posted by Killa_VN on 08-10-2004 07:26 PM:

just watched whole release. bit dark in some parts but im not complaining. film was well umm a little weird is all i can say even though denzel washington is a gr8 actor

good release videocd

__________________

Posted by pjfan281 on 08-10-2004 09:44 PM:

well i have been trying some things out. managed to resample the audio, but cant get the video source to work. tmpgenc wont even demultiplex cd2 and 3 because it doesnt see the video stream. when i used svcd2dvdmpg to resample the audio and demultiplex, it gave me the video stream. tried again to import that into tmpgenc and it it gave me an error for invalid video stream.

Posted by pjfan281 on 08-11-2004 02:44 AM:

quote:
Originally posted by BLUE-NEO
ok this is the final post for all who want this to convert to dvd. First use Mainconcept Mpeg Encoder and Re-Encode the Mpegs to new svcd mpegs. Then demultiplex with TMPGenc. place the m2v and mp2 files into TMPGEnc Xpress and convert to NTSC DVD all 3 disc seperately..that way you can fix the audio to make sure in sync, next use the regular TMPGEnc and combine the three DVDmpegs to one file.

Note: Be Sure To convert each of the mpeg2 to only use 30% of the disc or less...to make sure that once they are combined they will fit on the dvdr.

Next make menus with DVD Movie Factory V.3 and burn.

Once thats done..rating goes up..9/10/7

just a note on this. first thanks for the ideas. i used mainconcept as you said to make new svcd's and tmpgenc to demultiplex. then i used tmpgenc xpress to make dvd-mpg and fix the audio.

NOTE: one previous post said to use audio correction of -2000 for cd2 and -1650 for cd3. i found these values to be way off, at least in TMPGENC Xpress. for me a value of -1000 for boths cd2 and cd3 yeilded a near perfect sync.

I alos wanted to note its not necessary to make dvd-mpg's of cd2 and cd3 separarely and later combine them with tmpenc. TMPGENC Xpress can convert all three files at once, with audio corrections, and output to a single dvd-mpg file at the end, saving you one step. hope this helps. i'll be doing this conversion overnight now b/c it takes quite a while, but i tested the sync on 2 min samples and they worked fine.

Posted by rivaldo on 08-13-2004 02:55 PM:

first of all i would like to rate this release....
8.5/9/?
then,i have a question...
which is the easiest way to convert it to dvd with synched audio???
p.s i live in europe so i doesnt have to be ntsc...
thanks guys....

Posted by daboss54 on 08-13-2004 10:58 PM:

repack

how about a simple repack?

Posted by joey_75051 on 08-16-2004 02:13 PM:

PoST WAS ERASED

Posted by mark666 on 09-06-2004 01:20 PM:

is it me or is 5mins @ the end missing very annoying!!!

All times are GMT. The time now is 08:28 AM.

Pages (6): « 1 2 3 4 5 [6]
Show all 115 posts from this thread on one page