I'm looking to get another DVD player to play PAL SVCDs with an on-the-fly PAL->NTSC output. Currently im just re-encoding everything to NTSC. My question is about the output. I've read on here and DVDrHelp that playing PAL SVCDs with NTSC output results in strange aspect ratios and chopped pictures. Is this true for all the players?

I'm looking at the Norcent DP300 and a couple Apex models now. Do these output the cropped picture?

Thanks

Report this post to a moderator | IP: Logged

quote:

---

Originally posted by jya89
I've read on here and DVDrHelp that playing PAL SVCDs with NTSC output results in strange aspect ratios and chopped pictures. Is this true for all the players?

---

Report this post to a moderator | IP: Logged

check out this thread: http://www.vcdquality.com/forum/sho...&threadid=22751

Report this post to a moderator | IP: Logged

quote:

---

Originally posted by BigShrimp
check out this thread: http://www.vcdquality.com/forum/sho...&threadid=22751

---

Report this post to a moderator | IP: Logged

i bought the magnavox mdv421 from bestbuy recently ($70) after buying and returning 3 other players... all more expensive ones. The magnavox played everything i had, including PAL SVCD's on my NTSC TV without any bad AR or cropped picture... i paid special attention to the pal svcds because my last player wouldnt play them well.

It has been a good player, everything looks really good though the unit itself is on the cheap feeling side and doesnt have many front panel controls.

Report this post to a moderator | IP: Logged

Pioneer DV-260 available at walmart plays lots of formats and has PAL to NTSC transcoding. It plays WMA, MP3, JPEG, SVCD, VCD, CD, and DVD all for $88. It also has progressive scan.

Report this post to a moderator | IP: Logged

I have the KLH KD1220 from Bestbuy ($45), and it converts. No problems with any (s)vcd I have.

Report this post to a moderator | IP: Logged

After extensive reading throughout the web I bought a Sampo DVE-612(N). This was the only player I read about that played PAL (S)VCDs without either distorting the AR or cropping the frame and had perfect smooth PAL playback on an NTSC television. I can attest that it indeed runs flawlessly, frame is perfect AR/no cropping whatsoever and the playback is smooth as glass.

It's important to note that the 612(N) is different from the previous version DVE-612 (no "N") as it won't get the PAL AR correct.

I took a look at some of the players recommended here and they all seem to have some problems with PAL SVCDs.

magnavox mdv421: This player doesn't list anything about a PAL->NTSC converter. I suspect it's like my Sony which plays a PAL SVCD frame perfectly but has a slight "blur" every second as it doesn't know exactly what to do with the 25fps. Maybe not the same with the Magnavox but it's strange it could play PAL correctly without a converter.

Pioneer DV-260 : Has a review mentioning problems with getting a correct aspect ratio with PAL.

KLH KD1220 : Review shows 2 problems, again AR issues and audio sync problems with SVCD.

Maybe im just really picky Anyways, if anyone else is looking for a player with perfect PAL/NTSC output for (S)VCDs (as well as raw .mpg/.mpeg files, .vob files, mp3s, jpg, DVDR, etc) then I highly recommend the Sampo.

Report this post to a moderator | IP: Logged

which easy to use program can I use to change one of my pal SVCD to a NTSC.. It is the Tomb Raider by CTP that my Kiss DVD player has problems with and gives like blur on pic when playing...

Report this post to a moderator | IP: Logged

CYBERHOME! ch-dvd300 50$ at radioshack and you can make it region free $$

HERE ARE THE STEPS:
1. TURN ON
2. OPEN AND CLOSE THE TRAY W/O DISK ON IT.
3. PRESS: MENU,1,9
4. YOU WILL SEE A MENU. SELECT REGION IN THE MENU, PRESS ENTER AND PUT THE REGION YOU WANT (0=MULTI).
5. PRESS OPEN/CLOSE TRAY.
6. NOW YOU CAN ENJOY ANY REGION DVD

Report this post to a moderator | IP: Logged

Since you asked about the Norcent dp300....
It does everything the Sampo does, in fact its upgradeable with Sampo-based firmware (OFFA). Its on sale right now to at Walmart for $56 Cdn (about $39 USD), only thing is you gotta hunt for the right serial number if you want it upgradeable & macrovision/region free.

Report this post to a moderator | IP: Logged