I need your guys' help and suggestions. i got a p4 2.8 socket 478 system. It seems like its running a little hot to me using the stock cooling stem fan/heat sync i got. its running about 75 degrees celcius under a full load and about 64 under a little load. Any suggestions, or recommendations from you guys. i also am experimenting with overclocking it, managed to get it to go to 3.67 GHZ without playing with voltages, only issue is it got up to 99 celcius for the temp..so id like to get this thing has cool has ossible with being as quick as possible...thanks in advanced to all your suggestions.

__________________
Signup today at www.citywidehost.com, and Use the Discount Code: "SG50" (without quotes) for:
50% OFF YOUR FIRST MONTH

Report this post to a moderator | IP: Logged

Any cpu/heatsink combos from makers like Thermaltake, Zalman or Artic Cooling should do you just fine. If you're really into overclocking, you may want to look into water cooling, some excellent kits out there from the same manufacturers listed above.

__________________

Report this post to a moderator | IP: Logged

if you want to go nuts, go real nuts. Aesetek VaporChill

http://www2.asetek.com/main/page.asp?sideid=385

yes, that is a refridgeration unit on top of the pc

Report this post to a moderator | IP: Logged