here's the problem,
i got THIS car amp and i want to fit ti in my car.
now i don't think my car stereo has any audio pre outs
and i don't know if this amp can take a normal audio source if i tap into one of the rear speaker cables of my existing stereo.

but lets assume the above is true,
if this amp only takes a audio signal from a head units that has a pre out and i don't have one.
my only option then is to tap into one of the cars rear speaker cables to feed the amp its audio signal.

if there something i can put in-line before the amp to drop the audio signal down to an exceptable signal.

any ideas ?

__________________
*Meet the rest of the VCDQ Crew, HERE *

Report this post to a moderator | IP: Logged

http://www.evolution-world.com/2008...-converter.html

Report this post to a moderator | IP: Logged

http://www.caraudiodirect.co.uk/acc...b9k8s8ig9bvtb44

That or get a new headunit with a preout.

Report this post to a moderator | IP: Logged

I've used the converters before but they are notorious for introducing engine noise.


Buy a deck with RCA's. The last time I had one without them was 1991.

__________________
Ignorant of the facts to the extent that they end up unwittingly advancing an adverse cause that they might not otherwise support.

Report this post to a moderator | IP: Logged