Hi, I have a Ati Radeon 9200SE with TV-Out & want to capture a vcr/vhs tape onto a mpeg file on my pc.

I tried using ati's MMC & what a load of shi t that is. Is there any software to do this OR what Video Card to you recommend?

Report this post to a moderator | IP: Logged

A graphics card with TV-out is no good, you need one that has a video in as well (VIVO or All-in-wonder) or a separate TV card.

Software: VirtualVCR, VirtualDub, AVIO, etc. are more powerful but harder to use than the software that comes with the card.

Also watch out for macrovision copy protection on the tapes.

Report this post to a moderator | IP: Logged

IUvcr is great for it too, but you'll need some way of getting it into the pc, as mentioned.

do you have a DVcam with analogue in?

__________________
Google, you fucktard
my fingers are so weary
of repeating crap

Report this post to a moderator | IP: Logged

Thanks for the replies guys.

I have got a camera, but I want to capture VHS tapes.

These are my video card specs....

:::::::::::::::::::::::::::::::::::::::

# 64MB or 128MB DDR memory accelerates the latest 3D games

# Double Data Rate memory removes hardware performance bottleneck and provides end users with faster 3D graphics

# Driven by ATI’s Quad-pipe architecture and providing twice the rendering power of any currently competing product.

# Supports the new AGP 8X standard, providing a high-speed link between the graphics board and the rest of the PC (2.0 GB/sec)

# Full support for DirectX® and OpenGL® functionality

# VIVO (Video-in & Video-Out) Optional

# New SMARTSHADER™ technology allows users to experience complex, movie-quality effects in next-generation 3D games and applications

# SMOOTHVISION™ technology enhances image quality by removing jagged edges and bringing out fine texture detail, without compromising performance

# 128-bit floating-point color precision allows for a greater range of colors and brightness

# Unique VIDEOSHADER™ engine uses programmable pixel shaders to accelerate video processing and provide better-looking visuals

# ATI's new FULLSTREAM™ technology removes blocky artifacts from Streaming and Internet video and provides sharper image quality

:::::::::::::::::::::::::::::::::::::::::::

Ok, i think it has vivo.... s video?

I plugged in the s video into the PC, then plugged the yellow phono lead into the VCR. Downloaded that VirtualVCR & it said "you have no capture devices"...lol.

But i do, its a ati radeon 9200SE.

Any Idea's?

Report this post to a moderator | IP: Logged

If it IS the VIVO version (cos it is optional) then you'll need the correct drivers/suite off the ATI website.

__________________
Statistically... 9 out of 10 people actually enjoy gang rape.

Report this post to a moderator | IP: Logged

MMC is for ATI's all in wonder line. It probably won't be very useful if you're trying to use it with the wrong card.

If you don't have VIVO (see above) then you can run the tape through you digi-cam (via RCA cables) and into your computer with the firewire....maybe. I did that with a Sony once.

Otherwise, that TS of the VCR Tape ain't a bad idea!

-K

Report this post to a moderator | IP: Logged

Ok thanks for the replies & the excellent info. Im gonna try re-installing my drivers & see if that works.

Peace

Report this post to a moderator | IP: Logged

If you're using Win XP and you have the VIVO version of the card then the video capture drivers would have been installed automatically.

I'm 90% sure you will need to buy a separate PCI capture card.

If you don't want a card with built-in TV tuner (e.g. if you only want to capture from your VCR), you don't have to spend a lot to get a decent card. For example http://www.leadtek.com/multimedia/w..._vc100xp_1.html

Report this post to a moderator | IP: Logged

quote:

---

Originally posted by Mother
If you're using Win XP and you have the VIVO version of the card then the video capture drivers would have been installed automatically.

I'm 90% sure you will need to buy a separate PCI capture card.

If you don't want a card with built-in TV tuner (e.g. if you only want to capture from your VCR), you don't have to spend a lot to get a decent card. For example http://www.leadtek.com/multimedia/w..._vc100xp_1.html

---

Report this post to a moderator | IP: Logged

My VCR capture came this morning & it works a treat.... Can only capture DVD movie's through the player though. Tried to plug in the VCR & its just shows a blue screen, although it might be my VCR, its pretty ancient, lol.

quote:

---

Mother: Also watch out for macrovision copy protection on the tapes

---

Report this post to a moderator | IP: Logged

Maybe... maybe not.

So you can do an analogue capture from a DVD player (pointless as you can do a direct digital rip, but at least it shows your card and software are working). How's the player connected, s-video cable?

How do you then connect your VCR? Do you change to the composite input? Can you see a picture when playing a home-recorded tape or just watching TV through the VCR?

Report this post to a moderator | IP: Logged

Hi, I plug the yellow ended cable into the PC & the other end of the yellow ended cable into my VCR. Not using S-Video.

Yeah I wouldnt use my capture card for DVD ripping, lol, i was just testing

No picture what so ever, tried a home-recorded tape & a video movie & just a blue screen comes up. On monday I am going to buy a new VCR, Im pretty sure its got something to do with my VCR, its a schneider piece of cheap shit i bought for £15.99 a while ago, lol. I will let you know if it works on monday, thanks for the help !

Report this post to a moderator | IP: Logged