Love Jedi
Apr 2007
Junior Member
|
That is incredibly hot for a Core 2. Critical load for an E6600 used to be 61 degrees. So, something is seriously wrong there. Are you using a standard HSF or an aftermarket cooler? It seems to me as if the cooler is not on the processor properly. I use either an Arctic freezer Pro or Tuniq Tower and they both bring the temps down a lot. Coolers are not necessarily flat and sometime have a concave plate, so a technique called lapping is sometimes used.
I have a q6600 and my idle temps are about 40 degrees and load is about 65 to give you an idea. That's clocked from 2.4 to 3.2 with 1.35 volts of vcore going through it, and prime stable for 8 hours. Prime95 will run threads for as many cores as it sees. Current cooler is an arctic freezer pro.
If you download a program called coretemp, then it will give you a value called the Tj max. This is the temperature at which the CPU with throttle. I would suggest keeping about 25 degrees below that number.
So, I would advise that you reseat the HSF with some decent TIM and then boot to the bios and see what temps you are getting. I would expect something like 30-35 degrees at idle in the bios. Then boot into windows and make sure the temperatures are roughly even on the cores. It should be almost the same with a Core 2, with a quad, the temps will wander more between cores.
Report this post to a moderator | IP: Logged
|